11/30/2021»»Tuesday

Botnet Filter Asa Configuration

11/30/2021
  1. Gateway Botnet Filter Alert
  2. Botnet Server

ASA Configuration:!First create a regular expression with the unique attack string regex attackstring xyz123!Create an ACL to match the HTTP traffic towards the target server access-list HTTPTRAFFIC extended permit tcp any host 1.1.1.1 eq www!Create a regular L3/L4 class to match the traffic above class-map attackingtraffic. Cisco ASA Filtering Botnet Traffic Botnet Traffic Filter Concepts. The Botnet Traffic Filter works by monitoring the outbound connections of a network. Static Threat Database. The first way that the filter can be configured is by using static entries, which can include.

  • The Cisco ASA appliance with the Botnet Traffic Filter should be deployed at the edge of the enterprise, as the botnet database contains information only about external botnets. It is also best to address the external threat as close to the source as possible.
  • Cisco Systems, Inc - Cisco ASA 5500 Botnet Traffic Filter License - Subscription License - 1 Appliance Part Number #: L-ASA5520-BOT-1YR= CTI #: Availability: Out of Stock.


Similar Messages:

Gateway Botnet Filter Alert

ADVERTISEMENT

Cisco Firewall :: Botnet Filter Crashes ASA5505

Feb 27, 2011

I have a problem with my ASA5505 after enabling botnet filter my ASA reboots.Also while booting it usualy takes around 30minutes of random cycles before loading the OS. It seems to be falling at the license check.To fix the boot I usualy unplug the ASA for about 15minutes and then it will boot up fine.

Cisco Firewall :: How To Filter L2L Traffic To A PIX 7.2(4) (or ASA)

Feb 6, 2013

I've got a PIX running 7.2(4) with its outside interface on the Internet. The only thing this PIX is doing is acting as the endpoint for an IPSEC LAN-to-LAN tunnel with an Internet-connected ASA on another network.
I'd like to filter inbound Internet traffic to this PIX so that only the designated ASA can attempt to establish an IPSEC connection -- in other words, I want to prevent any other device on the Internet from even being able to attempt to establish an IPSEC connection to the PIX. As far as I know (and have seen), this can't be done with an access-list on the outside interface, since that access-list doesn't apply to traffic to the PIX itself.

Cisco Firewall :: ASA 5520 With CSC SSM Filter Won't Work

Sep 30, 2012

We have Cisco ASA 5520 with csc ssm 10 (product ver. Trend Micro InterScan for Cisco CSC SSM 6.6.1125.0)in Web>Global settings> URL filtering > Rules > Communications and Search> Social Networking category is set to block during work time and allow during leisure time(see the attachement), but rule for this category won't work. I mean social networking sites are always remain allowed.

Cisco Firewall :: Asa 5520 - How To Filter URL Which Includes HTTPS Using CSC SSM Module

Jan 7, 2011

How to filter URL which includes 'https', using the csc ssm module?

Cisco Firewall :: ASA 5520 - Filter Is Not Allowing To Access Certain Websites

Aug 20, 2012

We have a Cisco ASA 5520 and Web sense. I added a filter but it seems like it is still not allowing us to access a certain website from most of the machines however some machines with the same configuration work on the DMZ. Accessing website tells us:
'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'.
Filter I applied on the firewall:
filter url except 0.0.0.0 0.0.0.0 64.18.218.0 255.255.255.0 allow
filter https except 0.0.0.0 0.0.0.0 64.18.218.0 255.255.255.0 allow

How Does Firewall Block Or Filter Traffic On Specific Port Or IP Address

Nov 15, 2011

How does a firewall block or filter traffic on a specific port or IP address?

Cisco Firewall :: 2851 - Unable To Filter Https Traffic With Router And Websense

May 25, 2011

I am having a setup with a 2851 router & websense url filtering server where I need to forward the traffic to websense server for all the internet requests. The http traffic is getting filtered properly, but the https traffic is not getting filtered. The two commands I ahev given for http & http are as follows: ip inspect name test http urlfilter ip inspect name test https.

Cisco Firewall :: ASA 5520 - Real-time Log Viewer Filter Not Showing Rule Hits With ACL

Dec 20, 2011

I'm running into this issue on an ASA 5520 running version 8.2(2)9 and ASDM version 6.2(1).
I have an ACL denying traffic to a certain IP range and the logging level set to Debugging. The hit count is rising quite rapidly but when selecting 'Show Log' the Real-Time Log Viewer opens with a value of 0x13d0ee2a in the 'Filter By' field and no logs are ever shown.
Logging is enabled globally and Logging Filters on ASDM is set to Debugging as well.
how I can get the RTLV working?

Cisco Firewall :: ASA 5520 - Allow Traffic From DMZ To Internet And Block Traffic?

Apr 29, 2012

I have an ASA 5520 with the below config
Gi0/0: outside (Internet)
Gi0/1: inside (Internal users)
Gi0/2: DMZ (web servers, ftp, Mail etc..)
I have a SMTP relay deployed on the DMZ for mailing. I have also a mail servers installed in the internal lan,
I want to allow trafic from dmz to reach internal lan, and i want normally also allow stmp relay from dmz to reach Internet.
How can i block trafic from DMZ to reach Internal Lan (instead of smtp) if the to allow trafic from dmz to internet i must put ANY in the policy?
For allowing trafic from DMZ to reach Internet, the policy must be DMZ -----> ANY ----->Services., this policy means DMZ can implicity reach Internal Lan?

Cisco Firewall :: ASA 5520 - VPN Traffic Is Getting Dropped Through Firewall

Botnet serverApr 8, 2011

Our Local Network is behind the CISCO ASA Firewall.Whenever we are accessing to Client VPN server,it is getting connected but after few Minutes (May be 5/10/30 Min),the sessions are terminating. The same traffic through PIX is no issue , only with ASA Firewall. See the following Error and request you give the possible root cause for this.
2011-04-09 16:15:09 Local4.Info 172.16.1.68 %ASA-6-302016: Tear down UDP connection 87447908 for OUTSIDE:68.22.26.66/4500 to inside:172.16.9.10/4410 duration 0:27:49 bytes 18653

Cisco Firewall :: ASA 5520 VPN Tunnel Up But Not Traffic

Nov 1, 2012

We just migrated from a single 5510 to a dual (failover) 5520, It seems that everything is working except the remote VPN. We can establish a tunnel and authenticate as local users, (going to LDAP when all is working) but no traffic is passing. I know I am overlooking something but cant see it. [code]

Cisco Firewall :: 5520 VPN Traffic Between Interfaces

Jun 12, 2011

Our ASA 5520 firewall is running 8.0(4) IOS.I have an internal L2L VPN terminating on my firewall (from an internal remote site) on ENG interface.With the default 'sysopt connection permit-vpn' command enabled, VPN traffic is allowed to bypass the ENG interface acl.The security level on the ENG interface is set at 50.The security level on the destination interface PRODUCTION is set at 40.Inbound VPN traffic bypasses ENG interface acl and since higher-to-lower security level allows VPN traffic to flow freely from ENG to PRODUCTION, it seems the only place to check/filter VPN traffic is an ACL placed on the PRODCTTION interface and set at INBOUND (outbound VPN traffic).

Cisco Firewall :: Traffic Prioritization On ASA 5520?

Botnet Server

Dec 1, 2011

I have a Cisco ASA 5520 (8.0) and I'm trying to figure out how to prioritize traffic to specific websites (by either domain names or IP addresses/ranges). This document [URL] has some great examples, but I'm not able to create a class-map that will match addresses. I'm not doing any other traffic manipulation on this ASA.

Cisco Firewall :: ASA 5520 - Allow Traffic Between DMZ Servers?

Dec 20, 2011

We canĀ“t reach DMZ servers from other DMZ servers?If I make a ping from DMZ server to another, sometimes only recieve one ping, sometimes 4, sometimes 0.How can I allow the traffic between DMZ servers??
(ASA 5520 Version 8.4)

Cisco Firewall :: 5520 - Traffic From Inside To Outside

Mar 2, 2011

I am setting up a pair of 5520 in A/S mode but the traffic from inside to outside seems blocked somehow.
asa01# sh run : Saved
ASA Version 8.3(1)
host name asa01
enable password LFJ8dTG1HExu/pWQ encrypted
password 2KFQnbNIdI.2KYOU encrypted
names
[code]......
Base on the above configuration, I still cannot ping or HTTP.

Cisco Firewall :: ASA 5520 8.3 VPN Tunnel Drops Traffic

Aug 23, 2011

We have a 100 Mbps WAN circuit, we have configured an IPsec tunnel between ASA 5520 and Cisco 3845 Router for our DR site replication via Veeam Backup and Replication, it was working fine before, when we established the 3DES tunnel the traffic for certain subnets is dropped after an hour and it stops the replication, although tunnel remains up and we can access the other subnets, as soon as we clear the crypto SA and ISAKMP sessions on the firewall the traffic starts flowing again and then after an hour the traffic is dropped again.So far the testing and differnet configurations we tried are as under.
Tried with a different MTU size both on firewall and ESXi servers but nothing happened.Their is no QOS configuration.Checked the utilization on both ends its Noram although their are subsequent 100% spikes on Cisco 3845 but on average it remians at 30-40%.

Cisco Firewall :: ASA 5520 Cannot Block Incoming Traffic

Dec 12, 2012

I was configure 3 interface on ASA1st - managemetn (only for management)2nd - gig0/0 is connected to internet with real IP3rd - gig0/1 is connected to local networkI was configure routed NAT to internet.But I have problem with restriction incomming traffic to inside interface (ifname is inside)but I can connect to ip address of inside interface from other ip. It is wrong and i can't understand where is my mistake.

Cisco VPN :: 5520 - How Much Traffic Pass Through Into IPSec In ASA Firewall

Mar 20, 2013

How can I see the quantity of traffic that is passing through into an IPSec VPN in a ASA 5520.

Cisco Firewall :: 5520 Can't Get Traffic From Inside To Internet

Nov 27, 2011

I am trying to make a basic config on my 5520. The first goal is to make trafic from inside to outside.The internet address is 64.28.29.200 and the default internet gw is 64.28.20.193What am I missing since I can not get trafic from inside to the internet? [code]

Cisco Firewall :: Enabling Outbound Traffic Through ASA 5520 8.4(4)1

Apr 4, 2013

We've got a proyect that requires a few thin clients to connect to a remote PCoIP server.
Looking to the documentation, the only port required to be open through Firewalls is TCP/UDP 4172, however, we've seen (making interface captures) that it somehow also uses ESP (IP protocol 50).
We've got a static NAT translation translating those thin clients to a public IP address, we've created ACLs to allow inbound (shouldn't be necessary as our user is connecting to a remote server) and outbound traffic for TCP/UDP 4172 and ESP and I cannot make it work.
I've also enabled IPSec pass-through Inspection to no avail.
how should we configure our ASA to enable this kind of traffic?

Cisco Firewall :: ASA 5520 - Allow All Traffic From Frame Relay

Jun 14, 2012

I am installing an ASA 5520 and I have a problem on accepring the incoming traffic from an external office connected via Frame Relay.
On my OUTSIDE interface I have both the internet traffic and the external office traffic incoming. What comes from the external office is visible as 10.1.0.0/16.
I have to allow this traffic to enter the internal network, without any control. I would also keep the original IP address.
I have configured the Firewall but I don't know how to setup the NAT.

Cisco Firewall :: 5520 To Pass Traffic Through Ssm 20 And To Create Sensors

Jun 20, 2011

I have installed asa 5520 , software ver is 8.4,I have SSM-20 installed in asa 5520. How to pass traffic through this ssm-20 ,how to create sensors,how to update signatures of this IPS module ,is there any procedure to automatically update the signatures .

Cisco Firewall :: ASA 5520 - Permit Traffic To Inside Via MAC - Address?

Apr 6, 2011

I have a handheld device that will be used for inventory outside of our office. It has 3g capabilities. Is there anyway I can permit traffic from this device from the outside world coming into my network? I need to open a couple of ports so it can hit the server. But I have no intention to open these ports up to the entire world. I use an ASA 5520 with a managed router from our provider. I looked around on the Cisco site and the only information I found was for permitting and denying traffic from devices that are within the network.

Cisco Firewall :: Command To Check ASA 5520 Is Passing Traffic

May 14, 2012

how can i check that ASA is passing traffic? Also what command we can use to make sure VPN is working fine.

Cisco Firewall :: ASA 5520 - Traffic From DMZ And WAN Forwarded To Object Production

Sep 26, 2011

i have an ASA 5520 8.4(1) with following config
interface GigabitEthernet0/0
nameif WAN
security-level 0
ip address 216.52.185.33 255.255.255.240 standby 216.52.185.34
!
i need traffic (port 9350) from DMZ and WAN forwarded to object Production_23 port 3389, how do i achieve this ?

Cisco Firewall :: Traffic Shaping Per Users / Ip / Application Using ASA 5520

Apr 5, 2011

I hava Cisco ASA 5520 with AIP-SSM module. I would like to have the below features with ASA installed in Transparent mode.
1. Traffic shapping per user
2. Traffic shapping per IP subnet
3. Traffic shapping per Application
Is it possible with ASA installed in Transparent mode?

Cisco Firewall :: ASA 5520 Inbound Traffic On Backup ISP Connection

Nov 3, 2011

I have a client that has an ASA 5520 that has two internet connections, FIOS and Comcast. The ASA is configured to failover from the FIOS to the Comcast if the FIOS fails. This works perfectly fine. However, I was wondering if VPN and other inbound traffic will come into the secondary connection when it is active. I think VPN will work inbound when the FIOS connection fails, but I am not sure about the other inbound connections.

Cisco Firewall :: Force ASA 5520 Traffic Out Specific Interface

Jun 1, 2011

I'm trying to route all default traffic from my production environment through my ASA 5520 on the 'outside2' interface.The 5520 has a site to site VPN to our DR site on the 'outside/inside' interfaces via one ISP. On another ISP, interfaces 'outside2/inside2' go to the internet.
When I make my 3750 stack default route for the inside2 interface IP I cannot get to the internet. When it is pointed to the inside interface on my 5505, I can.
I get the following errors when I try to open google.com from a production server:Why is the 5520 trying to use the 'outside' interface instead of the 'outside2' interface to go out?

Cisco Firewall :: 5520 / 4510 - ASA Is Blocking For Returning Traffic

Apr 2, 2012

My internet link is connected on Internet Router & below downwards Cisco ASA 5520 is connected.ASA is connected with core switch cisco 4510 on downwards. our web based mail [URL] is hosted outside.
Lets suppose ISP pool is 4.4.4.0/28.suppose owa server is Static natted on ASA with 4.4.4.4. my machine traffic is going to internet with same ISP with PAT on Cisco ASA & internet is working on my machine. if i want to access {URL} or ip base for mail access, its not working & also it is not pinging. i suppose to ASA is blocking for returning traffic.
is there any way to traffic will go via same Firewall & comeback on same firewall port?

Cisco Firewall :: ASA 5520 Netflow Traffic Delayed To Solarwinds

Dec 5, 2012

I am currently testing Netflow accuracy on my Solarwinds platform. So I have been transferring a large file across an ASA 5520, which is set up to send Netflow data to out Solarwinds server.
The problem is that the Netflow data does not show up on Solarwinds for about 2.5 hours. Once it gets there the size is correct, but the time stamp on Solarwinds is 2.5 hours behind when the transfer happened. For routers it is showing up within a few minutes.
ASA is running 8.2(5) and Solarwinds NTA 3.9.0. Firewall and Solarwinds times / timezones are the same.

Cisco Firewall :: After Upgrading ASA 5520 To 8.4.2-8 VPN Clients Traffic Not Passing Destinations?

ListDec 26, 2011

after upgrading an ASA 5520 to 8.4.2-8 VPN clients traffic is not passing destinations other then destinations behind the inside interface. the log shows routing failure for the vpn client on the inside interface.it was working fine with 8.4.1 but the traffic is originated from the outside interface. confirm the the interface for VPN clients changed from outside to the inside interface.

Cisco Firewall :: Redirect Http And Https Traffic From ASA 5520 Via Squid?

Dec 20, 2010

Right now, in my network there is no proxy server and all users go straight through the ASA to access internet. I would like to put a squid with dansguardian (for web filtering). Steps in getting all http and https traffic from ASA go via my squid?