11/30/2021»»Tuesday

Marco Fireplace Brick Panels

11/30/2021

If you have a fireplace that is only listed to burn gas (vent-free, direct vent or B-vent), please see these universal panel options: El Dorado Decorative Brick Firebox Panel Seville Decorative Brick Firebox Panel Florence Decorative Brick Firebox Panel Each of these panels measure 22.5' wide by 19.5' high and they are 1/2' thick. Fireplace refractory panels and fireplace liners, also known as a fireplace wall, offer a simple and cost-effective way to enhance the appearance of your hearth. Our selection includes accessories compatible with all of the most popular fireplace brands, including Vanguard, Empire, and Monessen. Individual refractory panels are no longer manufactured for Marco fireplaces. Refractory panels must be purchased in kit form or a universal 'cut to fit' panel can be used to replace individual panels. We would like to take an opportunity to introduce you to a plus, inc. your source for Fireplaces, Insulation, Spray Foam, Plaster Mantels, Gutters and Garage Doors. Please take a moment to learn more about a plus, inc. And how we do business. Was incorporated in Georgia in 1985 to market fireplaces and insulation services. If your current fireplace firebrick lining has cracks of 1/4' or more, you should replace the panels for safety reason. Fits back, left or right. Not recommended for the hearth (bottom) of the fireplace - use HARU2428 for Hearth brick Panels are easily cut with a skill saw, saber saw, or utility knife.

Marco Fireplaces were originally built in southern California. Literally 1000’s of Marco wood burning and Marco gas burning fireplaces were produced and sold throughout North America. Marco Fireplace quickly became a brand of choice for many builders looking for a quality wood burning fireplace or gas burning fireplace.

Marco Fireplaces were originally built in southern California. Literally 1000’s of Marco wood burning and Marco gas burning fireplaces were produced and sold throughout North America. Marco Fireplace quickly became a brand of choice for many builders looking for a quality wood burning fireplace or gas burning fireplace.

Marco Fireplaces were easy to install and gave the home a warm, cozy feeling. Architects and builders quickly began specifying Marco wood burning and Marco gas burning fireplaces in their new homes as well as remodeling jobs. Both tract home builders and custom home builders found the Marco units acceptable for their projects.

Given the number of Marco units that are installed throughout the country, no wonder there is such a huge demand for parts and accessories. Lennox Hearth Products (LHP) which now operates under IHP still produces many of the popular Marco Fireplace Parts. Woodstoves-fireplaces offers many of those OEM parts at very competitive prices. Marco Doors, Marco screens, Marco door pins, and Marco blowers are just some of the offerings you will find at our online store. If you’re looking for discontinued Marco chimney components, we have those as well.

It is critically important to use OEM Marco parts on your fireplace. The use of 3rd party parts could void your insurance coverage in the case of a fire. Also, the use of non OEM Marco parts will void the original safety listing. Don’t be fooled by the vendors that tell you to use any other brand accessory part on your fireplace.

OEM Fireplace Doors - Complete Set of (2) doors Only Black Trim is available Download door cross reference chart These doors are not air tight or sealed glass door kit. The doors will require adjustments at time of install. Please see adjustment procedure included with door kit. It is recommended to use only OEM doors on your Marco Fireplace.
Panels
LNX36ABF
OEM Fireplace Doors - Complete Set of 2 Doors Door finish available in Black Trim only Download door cross reference chart These doors are not air tight or sealed glass door kit. The doors will require adjustments at time of install. Please see adjustment procedure included with door kit. It is recommended to use only OEM doors on your Marco Fireplace. Due to special packaging, this item does not qualify for free shipping
LNX42ABF
This Screen rod is only used with Marco branded fireplaces. The rod end slides into a small hole at the upper right or left with the center of rod held in with a small screw (not supplied). Set of 2
Marco Fireplace Brick Panels
Note: Due to weight and special packaging, this item does not qualify for free shipping and is NON RETURNABLE Price per panel. Fits bottom (hearth), back, left or right. Order multiple panels to cover larger areas.Can be altered to fit Marco FireplacesWhile every effort is made to display the products and other images on our site as accurately as possible, we cannot control the capabilities and limitations of your monitor. Therefore, we do not guarantee that your monitor’s display of any color, texture or detail of any actual merchandise will be accurate. We have no liability if the color of this product does not match the display on your monitor or device. Read important curing information
Note: Due to weight and special packaging, this item does not qualify for free shipping and is NON RETURNABLE $189.99 per panel plus shipping. Fits bottom (hearth), back, left or right. Order multiple panels to cover larger areas.Can be altered to fit Marco FireplacesWhile every effort is made to display the products and other images on our site as accurately as possible, we cannot control the capabilities and limitations of your monitor. Therefore, we do not guarantee that your monitor’s display of any color, texture or detail of any actual merchandise will be accurate. We have no liability if the color of this product does not match the display on your monitor or device. Read important curing information
FREE SHIPPING: Due to special packaging, this item does not qualify for return privileges - NON RETURNABLE When using this panel for the rear application do not install tightly to the side panels. Allow 1/4' gap for expansion contraction to avoid premature cracking.It is recommended that the maximum width of any panel not exceed 18 in. For example, if your rear panel dimension is 30 in, it is suggested to divide the rear panel into two pieces 15 in wide (expansion joint). Height of the panel is not restricted in this way.The full installation manual link is below. Please pick large or small brick pattern from the drop down box. While every effort is made to display the products and other images on our site as accurately as possible, we cannot control the capabilities and limitations of your monitor. Therefore, we do not guarantee that your monitor’s display of any color, texture or detail of any actual merchandise will be accurate. We have no liability if the color of this product does not match the display on your monitor or device. Panels are 1' Thick Small Brick Pattern - 3' x 8' Large Brick Pattern - 4' x 8' Price per panel.
Price per brick: Due to weight and special packaging, this item does not qualify for free shipping and is NON RETURNABLE
IHPH5612
Gas Valves DO NOT have return privileges. When ordering LP gas you will also receive LP gas regulator RS1751-013
Fireplace
RS710-502
This item DOES NOT qualify for return privileges. Price and ordering is per sq. foot. In Quantity box above, Enter the number of square feet desired. Select 100 sq ft for a full box (4 ft x 25 ft) Whenever possible, pieces are contiguous - if you order 4 sq ft, you will get one piece 1 ft x 4 ft Click here for testing standards
INSUL1

In a masonry fireplace, firebrick is used to construct the firebox. Refractory brick panels line the firebox of a prefabricated metal fireplace. In both cases, the bricks and fireclay mortar are designed to withstand extreme temperatures. However, over time, the brick, mortar, or panels can crack and crumble, creating a serious fire hazard.

Fireplace

Here’s what you need to do to address these problems:

Gas Fireplace Brick Panels

  • If a brick in a masonry fireplace cracks, you need to patch it. If the brick is crumbling, have it replaced with a new firebrick embedded in refractory mortar.

  • If the mortar joints in a firebox are crumbling, chisel out the old mortar and replace it with new mortar. This process, known as tuckpointing, is the same one you follow to replace or repair mortar joints in any brick structure. The only difference is that in a firebox, you must use refractory mortar, which is specially designed to withstand extreme temperatures.

  • If the integrity of the majority of the firebrick and mortar in the firebox is in question, have a qualified chimney sweep or masonry contractor inspect it. If replacement is in order, the job is best left to a pro.

  • If a panel of a prefabricated metal fireplace develops extensive cracks or is beginning to crumble, replace it with a new panel. This is a job that most do-it-yourselfers can handle: Simply remove the old panel by unscrewing the screws that hold it in place and install the new panel; it should fit snuggly against the adjoining panels. When replacing a rear panel, remove the side panels first. Refractory mortar is not generally needed, because the corners are designed to fit snuggly against one another.

    To make the job of finding a replacement panel easy, jot down the fireplace make and model number. (You can find these numbers on a metal plate just inside the opening of the firebox.) Give this information to the manufacturer or an installing dealer. Although replacement panels are often a stock item, a special order may be required, which can take from a few days to a couple of weeks. Don’t use the fireplace until a full and final repair has been made.

Fireplace Brick Panels

Repairing minor cracks and mortar joints in prefabricated metal fireplaces is essentially the same as with a brick firebox.