12/1/2021»»Wednesday

Rtl2838uhidir Windows 10 Driver

12/1/2021
  1. Rtl2838uhidir Win 10 Driver
Rtl2838uhidir win 10 driver
I have a Realtek RTL2838UHIDIR DVB stick, which I have not been able to get working. I have downloaded and successfully compiled a few different drivers from the web but to no avail.
dmesg grep -i realtek
27.083940] usb 2-1.1: Manufacturer: Realtek
dmesg grep -i rtl
[ 27.083939] usb 2-1.1: Product: RTL2838UHIDIR
[ 27.321432] dvb_usb_rtl2832u: no symbol version for module_layout
[ 27.321435] dvb_usb_rtl2832u: no symbol version for module_layout
dmesg grep -i dvb
[ 11.545396] e97a5d893fdf45c20799b72a1c11dca3b282c89c [media] fs/compat_ioctl: it needs to see the DVBv3 compat stuff
[ 11.545397] 53c91373bdd74f7e11d2726046a90b986c1ed650 [media] dvb: remove the extra parameter on get_frontend
[ 11.546302] e97a5d893fdf45c20799b72a1c11dca3b282c89c [media] fs/compat_ioctl: it needs to see the DVBv3 compat stuff
[ 11.546303] 53c91373bdd74f7e11d2726046a90b986c1ed650 [media] dvb: remove the extra parameter on get_frontend
[ 22.311984] tveeprom 17-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 22.576627] DVB: registering new adapter (saa7164)
[ 22.576631] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[ 24.997706] DVB: registering new adapter (saa7164)
[ 24.997709] DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)...
[ 27.155968] e97a5d893fdf45c20799b72a1c11dca3b282c89c [media] fs/compat_ioctl: it needs to see the DVBv3 compat stuff
[ 27.155969] 53c91373bdd74f7e11d2726046a90b986c1ed650 [media] dvb: remove the extra parameter on get_frontend
[ 27.321432] dvb_usb_rtl2832u: no symbol version for module_layout
[ 27.321435] dvb_usb_rtl2832u: no symbol version for module_layout
[ 35.836989] tveeprom 20-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 36.101783] DVB: registering new adapter (saa7164)
[ 36.101787] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
[ 38.555834] DVB: registering new adapter (saa7164)
[ 38.555837] DVB: registering adapter 3 frontend 0 (NXP TDA10048HN DVB-T)...
[ 172.284681] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 177.424224] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 187.132179] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 199.794739] dvb_usb_rtl2832u: no symbol version for module_layout
[ 199.797176] dvb_usb_rtl2832u: no symbol version for module_layout
As you can see, I have other dvb devices working, but not the RTLs
All ideas would be appreciated
Cheers
Dave

Rtl2838uhidir Win 10 Driver

Before we continue, we'll have to install the Windows driver for the RTL USB stick and then swap it for a 'low level access' driver. The default driver assumes you'll just be using the RTL-SDR for watching TV or radio but we want to be able to control it to do much more. Plug in the stick, Windows should automatically install the REALTEK 2832U. You want to upgrade a generic USB driver; you want to access a device using WinUSB; Note: 'libusb-based' above means an application that uses either libusb, libusb-win32 or libusbK. Updated 2020.03.28: Zadig 2.5 (4.9 MB) Other versions; System Requirements: Windows 7 or later. Windows XP and Windows Vista are NO LONGER SUPPORTED.